Polyoxymethylene dimethyl ethers synthesis from methanol and formaldehyde solution over one-pot synthesized spherical mesoporous sulfated zirconia

The synthesis of polyoxymethylene dimethyl ethers as an ideal diesel fuel additive is the current hot topic of modern petrochemical industry for their expedient properties in mitigating air pollutants emission during combustion. In this work, a series of spherical sulfated zirconia catalysts were prepared by a one-pot hydrothermal method assisted with surfactant cetyltrimethylammonium bromide (CTAB). The prepared sulfated zirconia catalysts were used to catalyze PODE_n synthesis from methanol and formaldehyde solution. Various characterization (XRD, BET, SEM, TGA, NH₃-TPD, FTIR, and Py-IR) were employed to elaborate the structure–activity relationship of the studied catalytic system. The results demonstrated that S/Zr molar ratio in precursor solution played an effective role on catalyst morphology and acidic properties, where the weak Brønsted acid sites and strong Lewis acid sites were favorable to the conversion of methanol and formation of long-chain PODE_n, respectively. The reaction parameters such as catalyst amount, molar ratio of FA/MeOH, reaction time, temperature and pressure were optimized. The speculated reaction pathway for PODE_n synthesis was proposed based on the synergy of Brønsted and Lewis acid sites, which suggested that Brønsted and Lewis acid sites might be advantageous to the activation of polyoxymethylene hemiformals [CH₃(OCH₂)_nOH] and methylene glycol (HOCH₂OH), respectively.     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...     

铁纳米粒子/碳纤维/环氧树脂基复合材料的制备和吸波性能

用直流电弧等离子体法制备Fe纳米粒子,用作微波吸收剂。用γ-氨丙基三乙氧基硅烷(KH550)对Fe纳米粒子的表面改性,然后按不同比例与环氧树脂均匀混合。在混合物中添加碳纤维后制备出Fe纳米粒子/碳纤维/环氧树脂基功能/结构一体化吸波复合材料,研究了吸收剂的添加量和浓度梯度、碳纤维以及平板结构等因素对其在2-18 GHz范围内吸波性能的影响。结果表明,碳纤维促进了结构体内电磁波的多重反射与吸收,在低频段出现反射损耗峰并提高吸波性能;随着Fe纳米粒子含量的提高吸波能力逐渐增强,吸收峰向低频移动;在环氧树脂的固化过程重力导致Fe纳米粒子浓度呈梯度分布,使平板状复合材料正、反两面的吸波性能出现差异,吸收剂浓度的梯度分布有利于电磁波的进入和吸收。     

Facile Synthesis of Ultrasmall CoS2 Nanoparticles within Thin N‐Doped Porous Carbon Shell for High Performance Lithium‐Ion Batteries

Cobalt sulfide (CoS₂) is considered one of the most promising alternative anode materials for high‐performance lithium‐ion batteries (LIBs) by virtue of its remarkable electrical conductivity, high theoretical capacity, and low cost. However, it suffers from a poor cycling stability and low rate capability because of its volume expansion and dissolution of the polysulfide intermediates in the organic electrolytes during the battery charge/discharge process. In this study, a novel porous carbon/CoS₂ composite is prepared by using nano metal–organic framework (MOF) templates for high‐preformance LIBs. The as‐made ultrasmall CoS₂ (15 nm) nanoparticles in N‐rich carbon exhibit promising lithium storage properties with negligible loss of capacity at high charge/discharge rate. At a current density of 100 mA g^?1, a capacity of 560 mA h g^?1 is maintained after 50 cycles. Even at a current density as high as 2500 mA g^?1, a reversible capacity of 410 mA h g^?1 is obtained. The excellent and highly stable battery performance should be attributed to the synergism of the ultrasmall CoS₂ particles and the thin N‐rich porous carbon shells derieved from nanosized MOF precusors.     

Improved mechanical properties of magnesium–graphene composites with copper–graphene hybrids

New magnesium nanocomposites reinforced with copper–graphene nanoplatelet hybrid particles have been prepared through the semipowder metallurgy method. Compared with the monolithic Mg, the Mg–1Cu–xGNPs nanocomposites exhibited higher tensile and compressive strength. In tension, nanocomposites revealed substantial enhancement in elastic modulus, 0.2% yield strength, ultimate tensile strength and failure strain (up to +89, +117, +58 and +96% respectively) compared to monolithic Mg. In compression, the nanocomposites showed the greatest improvement in 0.2% yield strength, and the ultimate compressive strength and failure strain (%) (up to +34, +59 and +61% respectively), whilst the compressive elastic modulus first increases and then decreases with an increase in the graphene nanoplatelets (GNPs) contents. The enhanced strength of the composites is likely to result from strengthening mechanisms invoked by the addition of Cu–GNPs hybrids.     

Irreversibility Analysis of MHD Flow over an Exponentially Stretching Sheet

This laminar fluid study investigates the effects of a magnetic field on the entropy generation during fluid flow and heat transfer due to an exponentially stretching sheet. Using the suitable transformations we have obtained the analytical solutions for momentum and energy equation in terms of Kummer's function. The velocity and temperature profiles are obtained for various physical parameters which are utilized to find the entropy generation number N_s and the Bejan number Be. The effects of various parameters on entropy production number and the Bejan number are studied through graphs using velocity and temperature profiles. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21112     

Fabrication of Mn–ZnO photoanodes for photoelectrochemical water splitting applications

Journal of Materials Science: Materials in Electronics - A photoelectrochemical (PEC) water splitting ability of pure ZnO and manganese-incorporated ZnO thin films fabricated via a simple...     

Thermal Analysis Infrastructure in OpenSees for Fire and its Smart Application Interface Towards Natural Fire Modelling

Fire Technology - Understanding the fire behaviour in buildings is fundamental and crucial to the practice of structural fire safety design. Traditionally, time-temperature curves associated with a...     

Frontiers in combustion techniques and burner designs for emissions control and CO2 capture: A review

The use of fossil fuel is expected to increase significantly by midcentury because of the large rise in the world energy demand despite the effective integration of renewable energies in the energy production sector. This increase, alongside with the development of stricter emission regulations, forced the manufacturers of combustion systems, especially gas turbines, to develop novel combustion techniques for the control of NO_x and CO₂ emissions, the latter being a greenhouse gas responsible for more than 60% to the global warming problem. The present review addresses different burner designs and combustion techniques for clean power production in gas turbines. Combustion and emission characteristics, flame instabilities, and solution techniques are presented, such as lean premixed air‐fuel (LPM) and premixed oxy‐fuel combustion techniques, and the combustor performance is compared for both cases. The fuel flexibility approach is also reviewed, as one of the combustion techniques for controlling emissions and reducing flame instabilities, focusing on the hydrogen‐enrichment and the integrated fuel‐flexible premixed oxy‐combustion approaches. State‐of‐the‐art burner designs for gas turbine combustion applications are reviewed in this study, including stagnation point reverse flow (SPRF) burner, dry low NO_x (DLN) and dry low‐emission (DLE) burners, EnVironmental burners (including EV, AEV, and SEV burners), perforated plate (PP) burner, and micromixer (MM) burner. Special emphasis is made on the MM combustor technology, as one of the most recent advances in gas turbines for stable premixed flame operation with wide turndown and effective control of NO_x emissions. Since the generation of pure oxygen is prerequisite to oxy‐combustion, oxygen‐separation membranes became of immense importance either for air separation for clean oxy‐combustion applications or for conversion/splitting of the effluent CO₂ into useful chemical and energy products. The different carbon‐capture technologies, along with the most recent carbon‐utilization approaches towards CO₂ emissions control, are also reviewed.